Viresco
mobile content here

Buy Online Now

    0 ITEMS  
     £0.00  
checkout empty
 

 

Viresco (UK) Ltd Tel: 44 (0)1845 525585 Fax: 44 (0)1845 523133 Email:sales@viresco-uk.com

Viresco (UK) Limited is a company registered in England and Wales with company number 5079726 VAT No: 481 9223 35 © 2003-2012

Suppliers of speciality products for the amateur pondkeeper and gardener worldwide

Pond Size Calculator

It is always very difficult to be exact in calculating the volume of your pond. Despite this it is important to have a good estimate of the amount of water in the pond so that you know how much of our products you need to add. There is no need to be worried about being absolutely accurate, your best estimate of measurements will give a good indication of the amount of water in your pond.

Use the calculators below based on your approximate pond shape and we will display your Pond Size in our left menu whilst you are on the site in both litres and gallons so that it becomes easier for you to decide how much of our product to order.

If your measurements are not whole metres or feet then please enter your measurements in decimal values.

e.g. A measurement of 80cm would be 0.8m.
e.g. A measurement of 3 feet and 6 inches would be 3.5 feet.
e.g. A measurement of 10 inches would be 0.83 feet.

Rectangle Pond

If your pond is a rectangle (or square) then simply measure the three sides as per the diagram below:

Rectangle Pond

Enter these measurements in the boxes:

W m/ft L m/ft D m/ft

Measurements are in: metres feet

And Click


Circular Pond

If your pond is a circular then simply measure the diameter and the depth as per the diagram below:

Circular Pond

Enter these measurements in the boxes:

W m/ft D m/ft  

Measurements are in: metres feet

And Click


Sloping Banks (Trapezium) Pond

If your pond has gradient slopes then you will need to add another measurement to our calculator based on the diagram below (you will also need to choose whether you have a rectangular or circular pond ).

Trapezium Pond

W: Width of the Pool- this is the Diameter for a circular pool and one side of a rectangle.
L: The other side length of a rectangle pool
O: The offset from the top outer edge to the bottom inner edge.

What shape is your pond: Circular Rectangular/Square

Enter these measurements in the boxes:

W m/ft D m/ft O m/ft

And for Rectangular/Square ponds you also need:
L m/ft        

Measurements are in: metres feet

And Click